Relate product

• 
  AR-15/M16 20- & 30-ROUND MAGAZINES BROWNELLS .No Jams Or Misfeeds On The Range, In The Field, Or Under FireFlawless feeding in the harshest tactical conditions using the latest military-type, glass-fiber reinforced composite follower design. Welded aluminum body is heat treated then hard-anodized for superior corrosion resistance.Tough, dry-lube coating eliminates the need for additional lubricants that would attract dust, sand, or dirt.Choose Mil-Spec stainless steel springs or our new, high lubricity, dry-lube-coated chrome silicon spring that’s corrosion-resistant certified to 500 hour salt spray standards, and less prone to spring “set.”Available in 20-round capacity with straight body or 30-round capacity with curved body.Made in the U.S.A.
• 
  AR-15/M16 PMAG 30-ROUND GEN M3 MAGAZINES MAGPUL .Super-Durable & Ultra-Dependable PMAG Refined & Battle-Hardened By Combat Experience The polymer magazine that revolutionized magazine technology for the AR-15/M16/M4 platform just got even better. The third-generation PMAG further expands the strength, reliability, and versatility of the original PMAG. Along with all variants of the AR-15/M16/M4, the GEN M3 is fully compatible with the HK&reg; 416 and MR556A1, M27 IAR, British SA-80, and even the FN&reg; SCAR&trade; MK 16/16S. It&rsquo;s molded from a polymer formula that delivers distinctly greater resistance to crushing and all forms of impact, with extra reinforcement in the mag catch and feed lip areas. A new-design four-way anti-tilt follower ensures even smoother feeding, even when contaminated by dust or grit. Pop-off dust cover, included, helps minimize debris intrusion and prevent damage during storage. The removable floorplate is both stronger and slimmer for easier side-by-side carry in tight mag pouches. A pen dot matrix on each side allows consistent ID marking that resists handling wear. PMAG 30 is available with plain, solid sides.</p>
• 
  AR-15/M16 PMAG 30-ROUND GEN M3 MAGAZINES WITH WINDOW MAGPUL .Super-Durable & Ultra-Dependable PMAG Refined & Battle-Hardened By Combat Experience The polymer magazine that revolutionized magazine technology for the AR-15/M16/M4 platform just got even better. The third-generation PMAG further expands the strength, reliability, and versatility of the original PMAG. Along with all variants of the AR-15/M16/M4, the GEN M3 is fully compatible with the HK&reg; 416 and MR556A1, M27 IAR, British SA-80, and even the FN&reg; SCAR&trade; MK 16/16S. It&rsquo;s molded from a polymer formula that delivers distinctly greater resistance to crushing and all forms of impact, with extra reinforcement in the mag catch and feed lip areas. A new-design four-way anti-tilt follower ensures even smoother feeding, even when contaminated by dust or grit. Pop-off dust cover, included, helps minimize debris intrusion and prevent damage during storage. The removable floorplate is both stronger and slimmer for easier side-by-side carry in tight mag pouches. A pen dot matrix on each side allows consistent ID marking that resists handling wear. PMAG 30 is available with a clear polymer window on each side that lets you see the load status at a glance. Windows are made from an all-new, advanced clear polymer formula that offers even more resistance to chemicals and impact than the original MagLevel PMAG.</p>
• 
  AR-15/M16 MBUS GEN 2 SIGHT SYSTEM MAGPUL .Reliable, Low-Profile, Quick-Deploy Backup SightsSpring-loaded mechanism locks securely in deployed or folded positionClamps to Picatinny (MIL-STD-1913) railsUses only 1½" of rail space when deployed, only 2½" long and ½" high foldedLightweight, impact-resistant polymer resists operational abuseStreamlined contours won’t snag on brush, sling, or other gearElevation-adjustable front sight mounts on forend; not for use on railed gas blocksWindage-adjustable rear sight will align with A2 front sight and has two apertures: .185" for close range, .070" for long range
• 
  AR-15 BCMGUNFIGHTER&trade; CHARGING HANDLE BRAVO COMPANY .Unique Latch Mechanism Reduces Wear & Prevents Breakage Heavy-duty charging handle has an innovative, oversized latch that distributes pull force evenly across the entire handle for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Available with Medium length extended latch or Large latch that&rsquo;s &frac14;&quot; longer for an even bigger, &ldquo;can&rsquo;t miss&rdquo; grasping surface. Small latch duplicates the size of the issue latch but includes the same design upgrades as the Medium and Large latches for increased strength and dependability.</p>
• 
  FACTORY PISTOL MAGAZINES FOR GLOCK&#174; GLOCK .Choose Genuine Factory Magazines For Top Performance & ReliabilityBe confident your Glock pistol will perform to factory standards each and every timeManufactured to Glock specifications in Austria by GlockAll models include round count indicator on rear face of magazine body and standard factory baseplateAvailable in all factory round counts, including high-capacity, and listed below by factory model designation and caliber &ldquo;GLOCK&rdquo; is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.&nbsp; Brownells is an independent dealer of parts and accessories for Glock&reg; pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.&nbsp; The use of Glock on this page is merely to advertise the sale of Glock parts or components.&nbsp; As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
• 
  AR-15/M16 30RD 223/5.56 MAGAZINE WITH MAGPUL FOLLOWER BROWNELLS .Our Ultra-Reliable Magazine With Popular Aftermarket Accessories Pre-Installed These curved 30-round model comes with the Magpul Self-Leveling Follower. This follower won&rsquo;t tilt as rounds are fed into or stripped from the magazine, and its self-lubricating polymer composition helps ensure smooth movement in the mag body for easier loading and ultra-smooth feeding. 30-Round Magazines are available in packages of 10.</p>
• 
  AR-15/M16 RAPTOR CHARGING HANDLE AXTS WEAPONS .For Fast, No-Slip Charging Of Rifle With Left Or Right Hand Drop-in replacement for factory issue handle lets you charge the rifle from either side of the receiver with a rapid palm &ldquo;blading&rdquo; motion or the traditional finger/thumb hold. Dual, over-sized release levers are mirror images of each other, with deeply grooved surfaces that ensure positive contact so you can operate the handle in one fluid, fast motion with wet or gloved hands. Radiused edges won&rsquo;t cut the hand or snag on clothing and gear. Gives top of rifle a unique, aggressive appearance, too.</p>
• 
  CTR BUTTSTOCK MAGPUL .Make Fast Adjustments Without Losing That Solid “Feel”Friction locking mechanism eliminates play between buffer tube & buttstock for solid “feel” when mounting rifle to shoulder. Make fast length-of-pull adjustments with rugged, spring-loaded hand lever.Wide comb helps shooter maintain a solid cheekweld.Accepts multiple ambidextrous sling attachment options, including web slings & single-point, push-button sling mounts.Available in Black, Flat Dark Earth, O.D. Green.Made in the U.S.A.
• 
  AR-15/M16 GL-MAG SURVIVAL COMMERCIAL BUTTSTOCK FAB DEFENSE .Keep An Extra Magazine Always On Your Rifle Reinforced polymer stock fits onto M4 Carbine style buffer tube and lets you keep a loaded magazine on the rifle at all times. Includes polymer 10-round magazine, and accepts all other standard-sized AR magazines. Quick-release gives instant access to extra magazine and under-stock position keeps magazine from getting caught on gear or webbing. Unique inverted positioning lever makes it easy to adjust length, but blends into the contours of the stock. Fits both Mil-Spec and Commercial diameter tubes, and features integrated ambidextrous QD sling connectors and thick rubber buttpad with positive no-slip texture. Buffer tube not included.</p>
• 
  AR-15/M16 20RD 223/5.56 USGI CS MAGAZINE BROWNELLS .A battle rifle is only as reliable as its magazine &ndash; make sure the one in your rifle is from Brownells. When the difference between a &ldquo;bang&rdquo; and a &ldquo;click&rdquo; is life and death, a magazine failure is more than inconvenient &ndash; it can be fatal. So when we decided to build our own AR-15/M16 magazines, reliability was our first priority. Some of us have sons and daughters serving overseas or in law enforcement, and we aimed to build the kind of magazine we&rsquo;d trust their lives with. We started with a clean slate, then worked out the bugs on the drawing board and the test range before we offered a single mag for sale, so you get a magazine of uncompromising quality and reliability that&rsquo;s built to last and ready to run hard. When failure is not an option, these magazines deliver on the range, in the field, in a tactical situation, under fire. Load these smooth-feeding magazines to maximum capacity and fire the full 20 rounds you expect. No jams, no misfeeds, no hangups. All components are made of mil-spec materials and are manufactured under strict, ISO quality control standards. The heat-treated, welded aluminum body is hard-anodized for superior corrosion resistance, then given a tough, dry-lube coating to eliminate the need for additional lubricants that would attract dust, sand, or dirt. The latest military-type, glass-fiber reinforced composite follower further guarantees flawless feeding in the harshest tactical conditions. Choose from our high lubricity, dry-lube-coated chrome silicon spring that&rsquo;s corrosion-resistant certified to 500 hour salt spray standards, and less prone to spring &ldquo;set.&rdquo; Updated material and design features like those in our 30-round magazine have been adapted to our straight-bodied, 20-round model. All models are available in standard military Gray. Since we manufacture these mags ourselves, we can maintain a large inventory. So, if you need magazines in a hurry, even in quantity, we can get them to you ASAP.</p>
• 
  1911 AUTO ELITE TACTICAL MAGAZINE .45 ACP WILSON COMBAT .Enhance Structural Integrity For Combat Or Professional DutyBuilt tough to withstand unforgiving, real-world conditions of combat or professional duty.Extra thick stainless steel body designed to enhance structural integrity, eliminating feed lip cracking or stress fatigue.Snag-free follower movement & easy insertion in the mag well— proprietary finishing process creates unusually strong, super-smooth seam.Non-tilt, self-lubricating follower fully supports the ammo stack, preventing nose-dives or double feeds.Increases spring life with less tension on the spring than standard magazines, making it easy to seat a fully loaded magazine with slide closed.Polymer base pad gives a firm purchase even when hands are wet; removes easily for cleaning.
• 
  AR-15 MBUS GEN 2 REAR SIGHTS MAGPUL .Low-profile, flattop-mounted, polymer sights deploy instantly at the touch of a finger to provide backup sighting if a primary optic fails. Streamlined contours mean there&rsquo;s nothing to snag on brush, sling, or other gear when folded. Spring-loaded ambidextrous release mechanism lets you hit the grooved tab on either side of the sight to deploy, and lock it in place. Hitting the same tabs retract the sight when you&rsquo;re done. Uses less than 1&quot; of MIL-STD 1913 Picatinny receiver rail space and locks securely in place with the included steel crossbolt. Provides the same height over bore as standard A2 iron sights. Windage-adjustable rear sight has two apertures: a large, .185&quot; peep and a .070&quot; peep. Designed for AR-type rifles and carbines, fits any weapon with Picatinny rails.</p>
• 
  AR-15/M16/ 308 AR SSA TRIGGER GEISSELE AUTOMATICS LLC .Two-Stage Trigger With Ultra-Fast Lock Time; Adjustable & Pre-Set ModelsSuper Semi-Automatic (SSA) 2-stage combat trigger has a fixed 4&frac12; lb. total pull weight, non-adjustable sear engagement, and additional safety features ideal for CQB and mid-range carbine work. A secondary &ldquo;safety sear&rdquo; captures the hammer if the primary sear accidentally releases due to hard impact, ensuring the rifle can fire only when the shooter actually pulls the trigger. Trigger pull is optimized for both deliberate, aimed fire and quick, &ldquo;snap shooting.&rdquo; The first stage builds gradually to 2&frac12; lbs., with a 2 lb. second stage that breaks clean, so the shooter can stay on target throughout the pull. A lightweight hammer driven by a full-power hammer spring speeds locktime and delivers positive ignition of all ammo types. All contact surfaces are wire-EDM cut to exact dimensions for precise engagement free of play. Direct replacement for factory trigger; may be installed without removing the safety. Operation and parts layout is similar to the USGI M16 trigger for easy maintenance. All springs are captive to simplify field disassembly for cleaning. Hammer and trigger pins are a close slip-fit in nominal .154&quot; (small pin) mil-spec receiver holes to enable installation with basic tools. Super Semi-Automatic-Enhanced (SSA-E) offers an even lighter, 3&frac12; lb. total pull weight, making it an excellent choice for precision Squad Designated Marksman type rifles where both accuracy and reliability are critical. First stage builds gradually to 2.3 lbs., followed by a 1.2 lb. second stage with a crisp, &ldquo;candy cane-like&rdquo; break. A semi-auto-only version of the Geissele full-auto combat trigger presently used in the U.S. Special Operations community.</p>
• 
  AR-15/M16 AMBIDEXTROUS SAFETY SELECTOR BATTLE ARMS DEVELOPMENT INC. .Machined, heat-treated steel safety selector Large surface area lets you manage the safety while wearing gloves Pads are deeply grooved for an ultra-secure grip Mounting hardware included. Other levers available on special order Available in black or flat dark earth All NFA rules apply
• 
  MODEL 19 9MM MAGAZINES GLOCK .Choose Genuine Factory Magazines For Top Performance & Reliability Be confident your Glock&reg; pistol will perform to factory standards each and every time with genuine Glock&reg; factory magazines. Manufactured to Glock&reg; specifications in Austria by Glock&reg;. All models include round count indicator on rear face of magazine body and standard factory baseplate.</p> &ldquo;GLOCK&rdquo; is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock&reg; pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
• 
  AR-15/M16 30RD 223/5.56 L5 ADVANCED WARFIGHTER MAGAZINES LANCER SYSTEMS .Advanced Warfighter Magazines (AWM) fill the gap between the current metal and polymer magazine designs. These lightweight molded polymer magazines stand up to rough handling and extreme conditions of tactical operations, including heat and impact of sustained full-auto fire. Permanently attached, wrap-around feed lips are made from a single piece of precision formed, hardened steel that is PTFE coated for corrosion resistance. They help promote smooth ammo movement and will not deform when the magazine is stored fully loaded over a long period of time. Tested to withstand temperature extremes of -50 degrees F to +180 degrees F and a 5 foot drop fully loaded, onto concrete without impairment of function. Non-reflective exterior has molded-in ridges and enhanced texturing that improve the structural strength and provide a solid grasping surface. Drops free from mil-spec magwells; load to full capacity and insert into weapons with bolt closed. 30-round model fits pouches designed for standard US-GI-spec magazines. Anti-tilt follower and constant-radius body curve helps ensure smooth, snag-free feeding. Hard polymer base plate provides a positive gripping surface for extracting mag from tight-fitting pouches and removes easily for disassembly and cleaning.</p>
• 
  MINI-14&reg; .223/5.56 MAGAZINES RUGER .Genuine Ruger&reg;, high quality magazines for optimal performance and long-lasting reliability. Spot welded all-steel body, self-lubricating nylon follower, and tempered steel spring give reliable feeding and extra-long service life.</p>
• 
  AR-15 ENHANCED MILITARY-STYLE TRIGGERS ALG DEFENSE .Gives A Smoother Pull While Preserving Reliability Trigger/hammer kits feature rugged military-type components carefully prepped to give a smoother trigger pull while maintaining the original geometry for maximum reliability. These are &ldquo;enhanced standard&rdquo; triggers, so the armorer continues to work with the configuration he&rsquo;s accustomed to. The QMS (Quality Mil-Spec) set has the sear contact surface precision-honed to smooth and lighten the pull to around 6&frac12; lbs. The ACT (ALG Combat Trigger) adds nickel-boron coating on the trigger and nickel-Teflon coating on the hammer, disconnnector, and pins to increase surface hardness and reduce friction, with an average pull weight of about 6 lbs.</p>
• 
  AR-15/M16 MOE BUTTSTOCK MAGPUL .Rugged, Economical, Drop-In Upgrade For Carbine Collapsible StockLightweight and comfortable, yet provides operator with solid support. Adjust length-of-pull adjustments fast using spring loaded, heavy duty release lever that won’t dig into your hand.Streamlined design won’t snag on clothing, gear, vehicle interior, or vegetation.Ergonomic comb contour helps shooter maintain a solid, consistent cheekweld.Made in the U.S.A. Check out the 360&deg; Image of the Magpul AR-15/M16 MOE&trade; Buttstock.</p>
• 
  THREADED BARREL for GLOCK&reg; LONE WOLF DIST. .Threaded For Compensator, With Conventional Rifling & Fully Supported Chamber Match-grade barrel has a threaded muzzle to enable mounting of a compensator or suppressor. Machined from a 416 stainless forging to tighter-than-factory tolerances for drop-in fit and improved lockup, with conventional land-and-groove rifling for excellent potential accuracy with both lead and jacketed ammunition. The improved feed ramp design ensures proper feeding with a wide variety of bullet types and provides maximum chamber support. Thread protectors sold separately.</p> &ldquo;GLOCK&rdquo; is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.&nbsp; Brownells is an independent dealer of parts and accessories for Glock&reg; pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.&nbsp; The use of Glock on this page is merely to advertise the sale of Glock parts or components.&nbsp; As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
• 
  M11 SEVERE-DUTY&trade; MUZZLE BRAKE PRECISION ARMAMENT .Superior Recoil Management With Minimal Dust Signature Designed for tactical applications that require minimal dust signature. A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. Wrench flats on top and bottom for easy installation and removal. Accu-Washer Muzzle Alignment System advised for installation.</p>
• 
  HD NIGHT SIGHTS TRIJICON .Combination of self-illuminating Tritium inserts and glow-in-the-dark paint enhances sight visibility in rapidly changing light conditionsTritium dots align for a simple, horizontal, three-dot sight picture that’s easy to acquire under stressBright orange or yellow outline around the front insert emits a short-term glow that helps the eye reacquire the sight after a rapid reduction in ambient light, such as during a building entryFront dot outline is recharged by exposure to any bright lightYellow glows for approximately 10 minutes, orange for approximately 5 minutesRear sight has a wide, U-shaped notch guide your eye quickly to the front sightHeavy-duty machined steel construction, with rounded no-snag edges Ridge on the rear sight allows one-handed slide racking in an emergency, yet won’t snag during reholstering &ldquo;GLOCK&rdquo; is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.&nbsp; Brownells is an independent dealer of parts and accessories for Glock&reg; pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.&nbsp; The use of Glock on this page is merely to advertise the sale of Glock parts or components.&nbsp; As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
• 
  WILSON-RODGERS 1911 AUTO .45 ACP MAGAZINE WILSON COMBAT .Smooth Feeding Self-Lubricating Synthetic Followers That Won't RustReliable feeding & slide stop operation with a molded, self-lubricating follower.Resists “spring set” with an extra-power Wolff spring.Built to close tolerances for excellent, universal fit.Made in the U.S.A